Beadlock Pro Ceramic Coating – 30ml Kit

BEADLOCK PRO CERAMIC PAINT COATING - 30ML KIT

Beadlock Pro Ceramic Coating – 30ml Kit

LIFE INSURANCE FOR YOUR PAINT. Beadlock Pro ceramic paint coating creates a hard-sacrificial barrier which shields your paint from the abuse coming from the sun and other harsh elements. How does it work? Beadlock Pro contains SiO2 (silica dioxide) which is the primary component of glass and is what gives...

Τιμή: €145.00

Σε απόθεμα

Περιγραφή

LIFE INSURANCE FOR YOUR PAINT.

Beadlock Pro ceramic paint coating creates a hard-sacrificial barrier which shields your paint from the abuse coming from the sun and other harsh elements.

How does it work?

Beadlock Pro contains SiO2 (silica dioxide) which is the primary component of glass and is what gives glass its strength and hardness. This integrated SiO2 technology makes this product far more durable and hydrophobic than any wax or sealant. This easy-to-apply coating is specifically designed to protect your paint from the unique conditions it sees both on and off-road. Whether you simply cruise the pavement or get down in the dirt Beadlock Pro ceramic paint coating can take the abuse. Product may be used on single-stage paint, gel coat, and clear coated paint surfaces.

Also available in a 30ml kit.Kit Includes: (1) Glass 100ml bottle of Beadlock Pro (1) Ceramic Coating Applicator Pad Directions

Prep:   Decontaminate the paint surface using Smooth Move paint decontaminater followed by claying the surface with a clay bar and Shine Mist clay lube. Polish the paint to reduce any surface defects and create maximum gloss. Wipe down the surface with Throw Back paint cleanser to remove any oils/residue left from your polishing step.

Apply:   Shake Beadlock Pro well. Apply directly onto the applicator pad and spread product evenly onto the surface. Product will have an “oil slick/rainbow” look to it as it begins to dry. This effect should begin within seconds. Give it 45-60 seconds to set up and then remove using a clean microfiber towel.

Using an additional towel, lightly wipe over the area again to ensure product is even and level on the surface. Once you have wiped with the second towel the coating will begin to “set-up”. Do not go back into an area minutes later and re-wipe or you could cause streaking.

How do you know it’s ready to be removed? Perform a test spot with your microfiber towel. The coating will have some slight resistance when you wipe. This slight resistance lets you know it’s ready for removal. If you have difficulty removing the product, you waited too long.

Pro Tips: Applying in colder conditions will give you a longer time frame before wipe-off. Applying in hotter conditions will give you a shorter time frame before you wipe-off. Our Slick Back primer polish will usually remove any product that was left on the paint too long.

MAINTENANCE TIPS!

 

Coating Specs:

Hardness: >9H

pH resistance: 2-13

Durability: up to 4 years

Thickness: single layer 2-3 microns

Contact angle: 108°

Επιπρόσθετες Πληροφορίες

Brands

Shine Supply

Αξιολογήσεις

Δεν υπάρχει καμία αξιολόγηση ακόμη.

Δώστε πρώτος μία αξιολόγηση “Beadlock Pro Ceramic Coating – 30ml Kit”

Η ηλ. διεύθυνση σας δεν δημοσιεύεται. Τα υποχρεωτικά πεδία σημειώνονται με *

CERAMIC COATING APPLICATOR PAD

Ceramic Coating Applicator Pad

The perfect applicator for apply ceramic coatings.    Microfiber applicators make ceramic coating application easier, quicker and more efficient, but coatings typically have a lower viscosity (not as thick) so they soak through the microfiber to the sponge, wasting valuable product. Our solution is this applicator. The layer of a...

€6.00 Προσθήκη στο καλάθι
DEFECTS BEWARE.RECOMMENDED FOR PROFESSIONAL USE ONLY. UNMATCHED CUTTING AND FINISHING ABILITY. As a professional detailer your most costly expense is your time. Chop Top provides you with fast, severe defect removal on even the hardest of clear coats, saving you time and money. If you could imagine a compound that would remove defects equal to if you were using 3000 grit sand paper - while leaving the finish almost LSP ready - it's now reality with Chop Top. Chop Top is designed to give you extreme cutting capabilities. It’s one of kind formula allows you to quickly remove up to 1500 grit sand scratch and severe defects. Not only will CHOP TOP give you an insane cut, but it will also finish down to an amazing gloss, saving you time and effort on your follow steps. This product is designed to be used with a rotary polisher and a Shine Supply exclusive P7600 series pad; however it is certainly not limited to this combination. Works excellent with large throw DA polishers.

Chop Top – 8oz (240ml)

DEFECTS BEWARE.RECOMMENDED FOR PROFESSIONAL USE ONLY. UNMATCHED CUTTING AND FINISHING ABILITY. As a professional detailer your most costly expense is your time. Chop Top provides you with fast, severe defect removal on even the hardest of clear coats, saving you time and money. If you could imagine a compound that...

€27.50 Προσθήκη στο καλάθι
HDO BLUE FOAM CUTTING/POLISHING PAD

HDO Blue Foam Cutting/ Polishing Pad

THE KING OF FOAM PADS.   Highlights: Lake Country HDO Foam Pads feature a dual-density design. This unique design eliminates the concaving effect that other pads experience, allowing the pads to maintain optimum surface contact and extended usage on long-stroke machines, like the Rupes 15 & 21mm or the Griots BOSS...

€18.00 Προσθήκη στο καλάθι
THROW BACK - GALLON

Throw Back – Gallon (3784ml)

CLEAN YOUR PAINT BEFORE ADDING PROTECTION.    Throw Back is specifically designed to completely remove polishing oils and fillers for accurate paint examination and surface preparation prior to adding your final layer of protection. Before applying any type of sealant or coating, a contaminant free surface is crucial to ensure...

€58.50 Προσθήκη στο καλάθι