Punch-It 16oz (474ml)

Punch-It 474ml

Punch-It 16oz (474ml)

KO...EVERYTHING.What is synergy?Synergy = the interaction of two or more substances to produce a combined effect greater than the sum of their separate effects. What makes Punch-It different from a detail spray?We’ve taken unique synthetic materials and blended them with silica to make the ultimate detail spray. Punch-it adds protection...

Τιμή: €27.00

Σε απόθεμα

Περιγραφή

KO...EVERYTHING.What is synergy?Synergy = the interaction of two or more substances to produce a combined effect greater than the sum of their separate effects. What makes Punch-It different from a detail spray?We’ve taken unique synthetic materials and blended them with silica to make the ultimate detail spray. Punch-it adds protection and creates an extremely hydrophobic, slick, self-cleaning surface which keeps your ride cleaner, longer. Works awesome on all exterior surfaces so there’s no limit to what you can knock out with this product. How do you use Punch-It?Shake well. Spray directly onto surface and spread product evenly. Flip the towel and wipe again using medium down pressure and slow arm speed. This method eliminates any streaks. If the surface is hot, spray directly onto a microfiber towel and wipe surface. Flip towel and wipe again using medium down pressure and slow arm speed. Product Highlights:Protects surface and boosts performance of existing protectionKeeps your vehicle, boat, motor home and much more...CLEANER, LONGER. Leaves surface slick and extremely hydrophobic  Pro Tips: For best results use with plush, high GSM microfiber towels. We prefer our Hyper-Soft towels.  Punch-It quickly boosts protection, slickness and hydrophobic properties of all our waxes and sealants. FAQ'sQ - What is the proper use of Punch-It?A- Punch-It can be used as a stand alone light protection for any exterior surface OR it can be applied to boost the existing protection of any of our waxes or sealants. Q - Can Punch-It be used on ceramic coated surfaces?A -  Yes, Punch-It will act like a light version of our Clutch silica spray when applied on top of ceramic coating. It will quickly add slickness and increase the hydrophobic properties of the ceramic coating. Q - Why does it cost more than a typical detail spray?A - The cost is due to the amount of silica and inorganic chemistry used in this unique blend. These materials are more expensive than raw materials that make up traditional detail sprays. Q - Why would I use this over regular detail spray?A - Punch-It is MORE hydrophobic, slicker and WILL NOT break down with heat and surface temperature. It also doesn't attract dust which keeps your vehicle cleaner, longer

Επιπρόσθετες Πληροφορίες

Brands

Shine Supply

Αξιολογήσεις

Δεν υπάρχει καμία αξιολόγηση ακόμη.

Δώστε πρώτος μία αξιολόγηση “Punch-It 16oz (474ml)”

Η ηλ. διεύθυνση σας δεν δημοσιεύεται. Τα υποχρεωτικά πεδία σημειώνονται με *

CERAMIC COATING APPLICATOR PAD

Ceramic Coating Applicator Pad

The perfect applicator for apply ceramic coatings.    Microfiber applicators make ceramic coating application easier, quicker and more efficient, but coatings typically have a lower viscosity (not as thick) so they soak through the microfiber to the sponge, wasting valuable product. Our solution is this applicator. The layer of a...

€6.00 Προσθήκη στο καλάθι
DEFECTS BEWARE.RECOMMENDED FOR PROFESSIONAL USE ONLY. UNMATCHED CUTTING AND FINISHING ABILITY. As a professional detailer your most costly expense is your time. Chop Top provides you with fast, severe defect removal on even the hardest of clear coats, saving you time and money. If you could imagine a compound that would remove defects equal to if you were using 3000 grit sand paper - while leaving the finish almost LSP ready - it's now reality with Chop Top. Chop Top is designed to give you extreme cutting capabilities. It’s one of kind formula allows you to quickly remove up to 1500 grit sand scratch and severe defects. Not only will CHOP TOP give you an insane cut, but it will also finish down to an amazing gloss, saving you time and effort on your follow steps. This product is designed to be used with a rotary polisher and a Shine Supply exclusive P7600 series pad; however it is certainly not limited to this combination. Works excellent with large throw DA polishers.

Chop Top – 8oz (240ml)

DEFECTS BEWARE.RECOMMENDED FOR PROFESSIONAL USE ONLY. UNMATCHED CUTTING AND FINISHING ABILITY. As a professional detailer your most costly expense is your time. Chop Top provides you with fast, severe defect removal on even the hardest of clear coats, saving you time and money. If you could imagine a compound that...

€27.50 Προσθήκη στο καλάθι
HDO BLUE FOAM CUTTING/POLISHING PAD

HDO Blue Foam Cutting/ Polishing Pad

THE KING OF FOAM PADS.   Highlights: Lake Country HDO Foam Pads feature a dual-density design. This unique design eliminates the concaving effect that other pads experience, allowing the pads to maintain optimum surface contact and extended usage on long-stroke machines, like the Rupes 15 & 21mm or the Griots BOSS...

€18.00 Προσθήκη στο καλάθι
THROW BACK - GALLON

Throw Back – Gallon (3784ml)

CLEAN YOUR PAINT BEFORE ADDING PROTECTION.    Throw Back is specifically designed to completely remove polishing oils and fillers for accurate paint examination and surface preparation prior to adding your final layer of protection. Before applying any type of sealant or coating, a contaminant free surface is crucial to ensure...

€58.50 Προσθήκη στο καλάθι